| LOT | Carton detail | ||||
|---|---|---|---|---|---|
| INR | CTN | CTN Size(cm) | Gross weight (kg) | ||
| 12 | 53×38.5×35.5 | ||||
The workstation is designed to keep chips and debris that inevitably occur during model making out of the workspace. The top surface of the workstation is covered with a metal mesh that allows gate cutting, filing, and other operations to be performed without contaminating the surrounding area, and allows for easy disposal of debris after work is finished. It is a new partner for model making, as you can work on it as soon as you think of it and quickly clean it up when you are done, so the place where you brought it in can be quickly transformed into a work space.
Simple, compact and convenient workbench
The compact body is loaded with convenient functions! The machine is useful in various aspects of model making. It is useful not only for basic cutting and cutting operations, but also for assembly and other work areas. Working on the workstation keeps dust and other debris out of the way, making cleanup easy. Even if small parts are dropped during work, they will fall into the internal tray, reducing the risk of losing parts.
operation part
The main body work section is made of a thick, sturdy metal plate with numerous holes. The holes are sized to allow chips to fall through and prevent parts from falling through. Large chips, etc. that cannot be dropped through the holes can be dropped from the notch on the front side of the main unit. In addition to chips and shavings, used sandpaper and other small-sized items can also be dropped. Although the plate alone is strong enough, it can be strengthened by attaching the attached metal stay, if necessary, when performing more forceful work such as pushing off parts. The metal plate is easily removable and can be easily cleaned of fine shavings that have accumulated in the corners.
Convenient pull-out tray for trash disposal
Working on the workstation keeps the area around it free of clutter and makes cleanup easy. On this workstation, you can perform cutting, shaving, and assembly work. Even if a part is dropped during work, it will fall into the tray inside, reducing the risk of losing the part. The tray for cutting scraps and other debris is pull-out and can be easily discarded when it accumulates. The tray has sufficient capacity to reduce the number of times you need to dispose of waste, allowing you to concentrate more on your work.
Convenient and easy-to-read text stand
Convenient and easy-to-read text standThe lid serves as a stand for instruction manuals, allowing for a larger work area and increased space efficiency. The stand adjusts to the optimum angle for holding instruction manuals, even those of a certain thickness. Since the stand holds the bottom part of the manual, even a printed manual can be held up with its pages open.
Convenient and easy-to-read text standExclusive cutter mat with perfect size
The included cutter mat is available in two different colors on both sides. The width of the mat fits the workstation wire mesh section perfectly, making it stable and difficult to shift during work. The green side can be used for gluing and cutting parts, while the black side can be used for cutting masking tape and decals. Of course, it can also be detached and used as a stand-alone tool. Its compact size makes it convenient for small tasks on a tabletop.