| LOT | Carton detail | ||||
|---|---|---|---|---|---|
| INR | CTN | CTN Size(cm) | Gross weight (kg) | ||
| 120 | 60 | 50.5×18.8×32 | 2.2 | ||
When extracting paint from a bottle, the paint often adheres to the edges and screw grooves, causing inconvenience during wiping, leading to paint wastage, and even contributing to the lid’s difficulty in closing. The Drip-Free Inner Cap is a dedicated inner cap designed to be attached to paint bottles, preventing paint from dripping, making it easier to extract paint from the bottle. After use, it can be kept attached to the bottle and closed with the lid. With five different shapes available, it accommodates a wide range of bottles for various model paints.
Easy to open and attach!
Simply attach the Drip-Free Inner Cap designed for the diameter of the paint bottle's opening with a single touch. The thin edge design allows for easy dripping of even high-viscosity paint, ensuring clean pouring without soiling the edges or screw grooves of the bottle. It eliminates the need for stirring with a stick, stirrers, or stirrers, allowing paint to be taken directly from the bottle, reducing paint waste. The material is highly solvent-resistant, making it suitable for water-based, lacquer, and enamel paints.
Please mix the paint well before use. When pouring paint, do so slowly and return it slowly. Before attaching the Drip-Free Inner Cap, wipe off any paint adhering to the pouring spout (contact surface with the Inner Cap) with a cotton swab or similar tool.
Can be closed with the cap still attached!
After extracting paint, the Drip-Free Inner Cap can be left attached to the bottle and closed without removal. Thanks to its special shape, paint does not leak, and it can be stored with high sealing performance. When using the paint again, simply open the lid as usual to pour out the paint, eliminating the need for reattachment or cleaning. Additionally, since paint is less likely to adhere to the edges or screw grooves of the bottle, it helps alleviate lid sticking due to dried paint.
If there is paint remaining on the edges, wipe it off before closing the lid. Attaching Drip-Free Inner Caps 01 to 04 may slightly increase the overall height when the lid is closed, compared to not attaching them. Drip-Free Inner Cap 05 has a different attachment method, so the total height with one cap attached is higher.
Ideal for airbrush paint storage!
By diluting paint in a spare bottle with the Drip-Free Inner Cap attached, you can pour paint directly into the airbrush cup without dripping. Any excess diluted paint can be stored and reused by simply closing the lid, reducing paint waste and increasing painting efficiency.
Compatible with various model paints!
Compatible with common model paints, it comes in five varieties to match various bottle shapes.
Compatible paint bottles
Drip-Free Inner Cap 04 is only compatible with lids integrated with a center plug. Drip-Free Inner Cap 05 is compatible with both lids with an integrated center plug and lids with a separated center plug. When using a lid with a separated center plug, be sure to secure the center plug before closing the lid. Not compatible with G-brand 10ml cylindrical bottles, 30ml cylindrical bottles, and bottles with lids and center plugs not integrated.
Product specifications
Sizes:
・Drip-Free Inner Cap 01: approximately φ19×H12mm
・Drip-Free Inner Cap 02: approximately φ29×H11mm
・Drip-Free Inner Cap 03: approximately φ29×H14mm
・Drip-Free Inner Cap 04: approximately φ25×H15mm
・Drip-Free Inner Cap 05: approximately φ41×H23mm
Set contents:
・Drip-Free Inner Cap 01: pack of 6 (for T-brand 10ml square bottles)
・Drip-Free Inner Cap 02: pack of 6 (for T-brand 10ml cylindrical bottles)
・Drip-Free Inner Cap 03: pack of 6 (for C-brand 10ml cylindrical bottles)
・Drip-Free Inner Cap 04: pack of 6 (for G-brand 15ml cylindrical bottles)
・Drip-Free Inner Cap 05: pack of 4 (for G-brand 50ml cylindrical bottles)
